 |
 |
 |
 |
|||
 |
|||||
 |
|||||
Digital Voice, Data, Video Tester |
|||||
| Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables. TIA/EIA standard wiring pair verification. Detects shorts, opens, reversed polarity, crossed and split pairs. Generates three distinct, selectable digital tone patterns for cable tracing and troubleshooting. Tracing modes can be adjusted for high performance LAN cables. |
|||||
NT650 |
|||||
GRE NC100 |
NT655 |
||||
TrueLength™
Features:
* Operation modes:
AWG/mm/mm2, Telco, Network, Coax,
Tone Generator, and Ohms
* Measures conductor length in feet or
meters
* Provides audible indicator for shorted
wires
* Large LCD for easier reading in
sunlight
* Measures copper or aluminum wires
8 to 30 AWG (3.264 to 0.255 mm, 8.366
to 0.051 mm2)
* High voltage protection
* Opens/capacitance measurement
5,000 feet at 15 pF/ft
* 9 V battery operation
* CE certified
* Troubleshoot new or existing lines by
measuring distance to shorts or opens,
and shorts between lines
* Trace wires by generating up to four
trace tones
* Manage cable inventory by measuring
length on spools
* Determine if wire length on spools is
adequate
NC500
The NETcat® Pro is a digital tool
for fast, accurate checking
of cables, wiring and network
service. Operated using a back-lit
touch screen display, the Pro not
only tests wiring continuity and
proper pair allocation, but measures
the length of cables and
determines if network service is
available.
When used with the NC-510
Accessory Kit containing seven (7)
expansion remote test modules, the
NETcat Pro can uniquely test
coax or twisted pair jacks from a
central location eight (8) at a time.
Specifications:
Dimensions: 3.3' x 1.4' x 6.7' -
Weight: 0.45 lb. (200 g) - Power
Requirements: 9V Alkaline battery
(PP3)
STM 8
The STM8 is a hand-held tester of
UTP, screened (ScTP) and fully
shielded (SSTP) cable for opens,
shorts, reversals, mis-wires and
split pairs. Easy to read LED display
and multiple remotes allow one
person to test and identify up to 4
different cable runs from one location.
Test for USOC, 10 Base T,
568A & B, Token Ring and TP-PMD.
PEI 468
Test 258, T568A, 10BaseT and
USOC. Identify opens, shorts,
Reversals & Transposed pairs.
Send tone to identify cable at remote
locations sequencing red & green
LED's provide fast, accurate and
simple to understand results.
Will alert tech if connected to an
active circuit
( without harming the unit)
Includes a built in tone generator.
PEI 468
NC500
STM8
