Pocket Level
Automatic Center Punch
Automatic Center Punch
A 5" Long pocket level as accurate as a 4'
level. Always in your pocket. It eliminates
the guess work out of leveling.
level. Always in your pocket. It eliminates
the guess work out of leveling.
Pocket size spring loaded center punch
works in Wood, Steel and aluminum.
A one hand operated starter hole, it
replaces awl and hammer.
And it's always with you.
works in Wood, Steel and aluminum.
A one hand operated starter hole, it
replaces awl and hammer.
And it's always with you.
This speciallty drill is designed to
drill through a baseboard, up the bottom
plate, without the need to remove the
baseboard. W/ 10' Fish Wire
drill through a baseboard, up the bottom
plate, without the need to remove the
baseboard. W/ 10' Fish Wire
L$D PL5
L$D ACP55
L$D BBZ5/16
Kit W/ Fish Wire
L$D BBZ-B
Bit Assembly
Dry Wall Knife
Rite-Zit
An All around 3 blades in 1 saw/utillity
knife. All blades are stainless steel. Both
sides are equipped with locking devices
so blades won't slide back and forth.
knife. All blades are stainless steel. Both
sides are equipped with locking devices
so blades won't slide back and forth.
Rite-Zit™ Wire and cable self laminating
marking lables. Will work with pen,
pencil or marker. Use with IDZ Identify-Zit
multiple run wire Identifier.
marking lables. Will work with pen,
pencil or marker. Use with IDZ Identify-Zit
multiple run wire Identifier.
Wet Noodle & Retriever
L$D KDS-3
L$D RZ114
A flexible, insulated 24" handle with
neodenium magnet attatched to one end.
The "Wet noodle" is 10' of chain, stop
ring, inring connector to attatch
second chain.
neodenium magnet attatched to one end.
The "Wet noodle" is 10' of chain, stop
ring, inring connector to attatch
second chain.
L$D WR24
Wet Noodle & Retriever
L$D WN10
Wet Noodle Replacement
Hole Cutter
This is the perfect tool for cutting round
holes in ceilings, walls and floors. It cuts
plasterboard, fiberboard, plywood, and
acrylic sheets. Transparent cowl prevents
chips from flying into eyes while cutting.
Cutting depth and radius is freely
adjustable. And best of all, this tool can be
used with any variable speed drill.
See our selection of cordless drills on
Pages 23 & 36
holes in ceilings, walls and floors. It cuts
plasterboard, fiberboard, plywood, and
acrylic sheets. Transparent cowl prevents
chips from flying into eyes while cutting.
Cutting depth and radius is freely
adjustable. And best of all, this tool can be
used with any variable speed drill.
See our selection of cordless drills on
Pages 23 & 36
Undercarpet Tape
25' Long annealed stainless steel,
3/4" wide with one end curled up and
the other rounded, Run wire between
padding and carpet.
3/4" wide with one end curled up and
the other rounded, Run wire between
padding and carpet.
L$D HC10
L$D UCT25
L$D HC12
