KX-TDA200 Expansion Cards

		Panasonic Communication Systems KX-TDA Digital Hybrid IP-PBX Systems

		KX-TDA0105	KX-TDA0171	KX-TDA0175
		KX-TDA0161	KX-TDA0172	KX-TDA0470
		KX-TDA0164	KX-TDA0173	KX-TDA0180
		KX-TDA0166	KX-TDA0168	KX-TDA0193
		KX-TDA0170	KX-TDA0174	KX-TDA0181

					Bottom of Page

KX-TDA100 & KX-TDA200 STATION CARDS

	KX-TDA0105		Memory Expansion Card (MEC) For TDA100 / 200 For use with the KX-TDA100 / 200 only with version 1.1 or higher software Required when double capacity DXDP is used Please refer to the Memory Expansion Requirements Chart #6

				PAN DA0105
			Weight: 2 lbs



	KX-TDA0161		4-Port Doorphone Card (DPH4) Required to connect KX-T30865 , KX-T7775, Door Camera or Channel Vision doorphone * Supports up to 4 doorphone and door opener relays * Mounts on the KX-TDA0190 (OPB3) card Please refer to System Capacities Chart #2 #3 #4 Prior to configuring system


				PAN DA0161
			Weight: 2 lbs



	KX-TDA0164		4 EIO Card (EIO4) Mounts on the KX-TDA0190 0optional 3 Slot Base card (OPB3) * Contains 4 dry contacts that allows you to control external devises such as a door strike or a automatic garage door-opener * You can also connect up to 4 external sensor devises


				PAN DA0164
			Weight: 2 lbs



	KX-TDA0166		16 Channel Echo Canceller Card Fits inside KXTDA0190 * Provides Echo Cancellation for larger multi-party conference calls (from 5 party to 8 party) * Trunk to trunk transfer * Recommended for use in VoIP installations Conference Calling (8 Party)


				PAN DA0166
			Weight: 2 lbs



	KX-TDA0170		8-Port Digital Hybrid Station Card (DHLC8) 8 Ports per card * Supports KX-T7600 Series KX-T7420/25/31/53/56/40 (DPT), KX-T7750/20/30/31/37/40 (APT) telephones * Single Line (SLT) and DSS console & KX-T0141, 2 Port Cell Station * 2 Ports provide power failure transfer * 1 Card requires 1 free slot Please refer to System Capacities Chart #2 #3 #4 Prior to configuring system


				PAN DA0170
			Weight: 3 lbs



	KX-TDA0171		8-Port Digital Station Card (DLC8) 8-Ports per card * Supports KX-T7600, and KX-T7420/25/31/53/56/40 telephone (DPT), and DSS console & KX-T0141, 2 Port Cell Station * 1 Card requires 1 free slot Please refer to System Capacities Chart #2 #3 #4 Prior to configuring system


				PAN DA0171
			Weight: 3 lbs



	KX-TDA0172		16-Port Digital Station Card (DLC16) 16-Ports per card * Supports KX-T7600 and KX-T7420/25/31/53/56/40 telephone (DPT) and DSS console & KX-T0141, 2 Port Cell Station * 1 Card requires 1 free slot Please refer to System Capacities Chart #2 #3 #4 Prior to configuring system


				PAN DA0172
			Weight: 3 lbs



	KX-TDA0173		8-Port Single Line Station Card (SLC8) 8 Ports per card * Supports single line telephones (SLT) 2 Ports are equipped with power failure transfer. Also equipped with 8 DTMF receivers * Caller ID for 8 (SLT) Add the KX-TDA0168 * 1 Card requires 1 free slot Please refer to System Capacities Chart #2 #3 #4 Prior to configuring system


				PAN DA0173
			Weight: 3 lbs



	KX-TDA0168		SLT Station Extension Caller ID (SLT-CID8) Daughter board mounts on KX-TDA0173 8 Port Station Line card only * Allows the system to pass caller ID information to single line devices * Requires TDA version 2.0 software Supports Bell / ETSI FSK only * All 8 circuits on the SLC8 card will provide caller ID information


				PAN DA0168
			Weight: 2 lbs



	KX-TDA0174		16-Port Single Line Station Card (SLC16) 16-Ports per card * Supports single line telephones (SLT) 4 Ports are equipped with power failure transfer. Also equipped with 16 DTMF receivers * 1 Card requires 1 free slot Please refer to System Capacities Chart #2 #3 #4 Prior to configuring system


				PAN DA 0174
			Weight: 3 lbs



	KX-TDA0175		16-Port Single Line Station Card with Message Waiting (MSLC16) 16 Ports per card * Supports single line telephones with or without Message waiting lights * 4 Ports are equipped with power failure transfer. * Also equipped with 16 DTMF receivers * 1 Card requires 1 free slot Please refer to System Capacities Chart #2 #3 #4 Prior to configuring system


				PAN DA0175
			Weight: 3 lbs



	KX-TDA0470		16 Ports per card supports up to 16 IP Phones (IP-ENT16) The KX-TDA0470 is required when using IP Telephones KX-NT136 Each KX-TDA0470 card requires one free slot and supports uo to 16 KX-NT136 IP extensions. A maximum of 4 cards can be installed in the KX-TDA100 and 8 can be installed in the KX-TDA200 * Please refer to system capacities Chart # 2 & 3 prior to configuring a system


				PAN DA0470
			Weight: 3 lbs



KX-TDA100 & KX-TDA200 CENTRAL OFFICE CARDS

	KX-TDA0180		8-Port Loop Start CO Trunk Card (LCOT8) 8 Ports per card * 2 Port have power failure transfer * 1 card requires 1free slot * 1 Optional (KX-TDA0193) * 8 Port caller ID card can be mounted to support caller ID Please refer to System Capacities Chart #2 #3 #4 Prior to configuring system




				PAN DA0180
			Weight: 3 lbs



	KX-TDA0193		8-Port Caller ID Card (CID8) Required to receive caller ID information from CO Each KX-TDA0193 card Activates caller ID on 8 CO lines Mounts on the KX-TDA0180 and KX-TDA0181 Loop Start CO Cards Please refer to System Capacities Chart #3 #4 Prior to configuring system



				PAN DA0193
			Weight: 1 lbs



	KX-TDA0181		16-Port Loop Start CO Trunk Card (LCOT8) * 16 Ports per card * 4 Port have power failure transfer * 1 card requires 1free slot * Up to two Optional (KX-TDA0193) 8 Port caller ID card can be mounted to support caller ID Please refer to System Capacities Chart #2 #3 #4 Prior to configuring system



				PAN DA0181
			Weight: 3 lbs




BACK								NEXT

NEW PRODUCTS			CLOSE OUTS			Top of Page

HB DISTRIBUTORS 2007 © All Trademarks Belong to Their Respective Companies. All Prices and Manufacturer's Specifications are Subject to Change Without Notice, Daily. All rights reserved. HB Distributors can not be responsible for misinformation, typographical errrors. Art work not to scale.