Panasonic Communication System
KX-TDE100 & TDE200
Converged IP-IPX Systems
    
 
 
 
 
   
    Power-conditioned UPS Music On Hold Power Supplys      
 
TDE MPR Card  
       
       
    Bottom of Page  
   
 
**** IMPORTANT ****
  
 

The KX-TDE100 and KX-TDE200 are certified dealer models. These models must be activated prior to installation.
Only dealers who have successfully completed the KX-TDE Technical Training course and have a valid KX-TDE certification number
can activate these systems. For detailed information on how to register a system please visit the www.kxtsupport.com
website.
If you are interested in becoming KX-TDE certified dealer, Please contact your local Panasonic Account Representative
or
HB DISTRIBUTORS " The Installer's Friend "
    
   
 
     
     
 
KX-TDE100
   Control Unit  
Maximum Capacity
* 64 IP stations
* 128 SIP
* 32 Trunks
Contains
* 1 Cabinet with 6 free slots
* 1 Main Processor unit with
* 1 SD Card
* 4 Virtual Extension Slots
* 4 Virtual CO Slots
* 2CH Simplified Voice Mail
   Power supply NOT Included, Add the KX-TDA0104 (M) or the KX-TDA0108(S)
   Power Supply, see chart #1
Features (Some features listed are optional)
* Multi-Cell Wireless  (Add the KX-TDA0156 or the KX-T0155 ) Cell Site
   The KX-TDA0156 Requires a KX-TDA0144 (8 Port) Card or KX-TDA0143
   (4 Port) Card
* VoIP Gateway with QSIG (Enhanced System Networking)
   (Add the KX-TDA0484 or KX-TDA0490 Card)
* VoIP Extensions
* PC-Based Programming. (Add the KX-TDA0196 card)
* DXDP (Digital eXtra Device Port)
* 2-MOH Port (See Clarity or On Hold Plus)
* 2-Paging Port (See Clarity or Viking)
* Automatic Route Selection (ARS)
* Toll Restriction
* Caller ID (Name & Number) (Add the KX-TDA0193 card)
* ISDN Primary Rate Interface KX-TDA0290 card (PRI) with QSIG and
   the KX-TDA187 card (T1)
* Networking with Centralized Voice Mail
* Voice Mail Integration
* Uniform Call Distribution (USD)
* Direct Inward System Access (DISA) - (Add the KX-TDA0191 Card)

          KX-TDE Digital Hybrid IP-PBX System Feature List Chart # 1, #2, #3, #4, #5,#A
  
PAN DE100
  
 
 
 
Helpful Links
  
Station Cards
CO Cards
  
Phones
Wireless
  
IP Phones
Feature Cards
  
Activation Keys
IPCMPR
  
Features Charts
 
   
   
 
   
     
 
KX-TDE200
   Basic Shelf  
Maximum Capacity
* 64 IP stations
* 128 SIP
* 32 Trunks
* 15' Cord
Contains
* 1 Cabinet with 11 free slots
* 1 Main Processor unit with
* 1 SD Card
* 4 Virtual Extension Slots
* 4 Virtual CO Slots
* 2CH Simplified Voice Mail
   Power supply NOT Included, Add the KX-TDA0104 (M) or the KX-TDA0103 (L)
   Power Supply, see chart #1
Features (Some features listed are optional)
* Multi-Cell Wireless  (Add the KX-TDA0156 or the KX-T0155 ) Cell Site
   The KX-TDA0156 Requires a KX-TDA0144 (8 Port) Card or KX-TDA0143 (4 Port)
   Card
* VoIP Gateway with QSIG (Enhanced System Networking)
   (Add the KX-TDA0484 or KX-TDA0490 Card)
* VoIP Extensions
* PC-Based Programming. (Add the KX-TDA0196 card)
* DXDP (Digital eXtra Device Port)
* 2-MOH Port (See Clarity or On Hold Plus)
* 2-Paging Port (See Clarity or Viking)
* Automatic Route Selection (ARS)
* Toll Restriction
* Caller ID (Name & Number) (Add the KX-TDA0193 card)
* ISDN Primary Rate Interface KX-TDA0290 card (PRI) with QSIG and
   the KX-TDA187 card (T1)
* Networking with Centralized Voice Mail
* Voice Mail Integration
* Uniform Call Distribution (USD)
* Direct Inward System Access (DISA) - (Add the KX-TDA0191 Card)
     KX-TDE Digital Hybrid IP-PBX System Feature List Charts #1, #2, #3, #4, #5,#A
  
PAN DE200
  
 
 
 
Helpful Links
  
Station Cards
CO Cards
  
Phones
Wireless
  
IP Phones
Feature Cards
  
Activation Keys
IPCMPR
  
Features Charts
 
   
 
 
MOUNTING HARDWARE & EQUIPMENT
 
     
     
 
"Easy" Installation Kit
      
KX-TDE100 & TDE200 "Easy" Installation Kit
 
Call for Configuration  
PRICE: P.O.R.
  
 
   
 
   
     
 
KX-A243X
   19" Bracket For The KX-TDE100  
For mounting the KX-TDE100 cabinet in a 19" rack
Equipment Rack (ITN 1907) 19" X 72" Racks		  
PAN A243X
 
 
 
   
     
 
KX-A242X
   19" Bracket For The KX-TDE200  
For mounting the KX-TDE200 cabinet in a 19" rack
Equipment Rack (ITN 1907) 19" X 72" Racks		  
PAN A242X
 
 
 
   
     
 
19" Rack ITN 1907
   Equipment Rack  
ITN 1907       19" X 72"
For mounting system components 		 
ITN 1907
   
   
 
 
   
     
 
Minute Man
MIN E1500
   Tower or Rack Mountable Battery Back Up  
   
MIN E1500
    
 
   
 
   
     
 
Tripp-Lite
TLP 1B20
   Signal ground Surge Protection  
2 outlets; direct plug-in
Surge energy absorption: 600 joules; 48,000 amps
Diagnostic LED indicates protection present
MI/RFI noise filter
 
TLP 1B20
 
 
 
 
 
   
     
 
Minute Man
MIN PRO1500E
   Battery Back Up    
Pro E Series is designed for the protection of PCs, TELEPHONE SYSTEMS and data
communications. Built in double boost and single buck AVR
(automatic voltage regulator) function compensates for broader range of low AC
voltage situations like brownout and sags as well as high AC voltage situation like surges and spikes saving internal battery power for blackout. Independent Battery
Bypass™ allows the UPS to provide voltage regulation with surge and spike
protection on utility AC power even when the batteries are weak or dead.
Includes MINUTEMAN Sentry ll ™ power management and diagnostic software. Integrated USB and RS232 ports for software communication.		  
 
MIN PRO1500E
 
 
   
   
   
     
 
Powervar
Power Conditioners
  Power-conditioned UPS  
When combined with a POWERVAR power conditioner,
POWERVAR's ACE line of power-conditioned UPSes are
field-proven to increase equipment reliability and up time by as
much as 70%—and to provide critical backup power in the
event of those all too common power glitches
 
   
   
   
MUSIC & COMMERCIAL ON HOLD
    
     
     
 
Clarity by Valcom
CLA SFMT
  Music on hold  
CLA  SFMT
 Wall Mountable FM Radio with Antenna and Power Supply.
 
CLASFMT
    
     
   
   
     
 
On Hold Plus
OHP 8000
  

On-Hold Plus Music/Message On Hold USB Flash Drive
For use with all PBX and Key Phone systems. New to the OHP product line, the
OHP 8000 USB plays audio directly from any USB Flash drive
(128 MB drive included) for continuous playback. To add new audio content,
just copy any mp3 file from your PC to the USB flash drive.

The Included 128 MB USB Flash Drive is preloaded with nearly 3 hours of great
sounding fully licensed music and messages so it's all ready to go, right out of the box.
High quality audio playback coupled with up to 140 hours of playback time
(via any off-the-shelf 2GB USB Flash drive) makes the OHP 8000 USB suitable for
background music, Storecasting as well as music/message on-hold applications.

Includes Message Studio software -- simple to use mini-application allows user to
quickly and easily create customized on-hold audio or Storecasting content from any
Windows-based PC.
* Retains Music/Message content even during power loss
* Auto-Start Automatically begins continuous playback after a power outage
* Volume control
* RCA and 3.5mm mini audio cables included
* 110/220v switching adapter with US and VDE plug adapters
* Easy wall mounting

 
 
OHP8000
  
 
 
   
 
   
     
 
On Hold Plus
OHP 6000
   Commercial on Hold  
* MP3 on Hold
* MP3 only
* 1-FREE Personalized Message (a $99.00 value)
 
     
     
   
   
     
 
On Hold Plus
OHP 7000
      
* Digital Flash Memory
* Integrated CD Mechanism
* CD Auto load
* USB Connection
* Auto-start after Power Loss
* Wall-Mountable
* Free Personalization
 
OHP7000
  
 
   
   
 
KX-TDE100 & TDE200 SYSTEM POWER SUPPLY  
(One required Per System)
  
     
     
 
KX-TDA0108
   S-Type Power Supply PSU-S  
Small plug in system power supply for use in the KX-TDA100 or KX-TDE100
Basic shelf
To determine the correct size power supply for your application,
please refer to the Power Supply Sizing Chart #1		  
KX-TDA0108
   
 
 
 
   
     
 
KX-TDA0104
   M-Type Power Supply PSU-M  

Medium plug in system power supply for use in the KX-TDE100 , KX-TDE200 ,
KX-TDA100 & KX-TDA200 Basic shelf.
To determine the correct size power supply for your application,
please refer to the Power Supply Sizing Chart #1
 
KX-TDA0104
     
 
 
   
   
     
 
KX-TDA0103
   L-Type Power Supply PSU-L  
Large plug in system power supply for use in the KX-TDA200 or KX-TDE200
Basic shelf.
To determine the correct size power supply for your application,
please refer to the Power Supply Sizing Chart #1		  
KX-TDA0103
 
 
 
   
     
 
KX-A237
   AC Adaptor for the KX-NT136 & KX-NT265

Includes one adaptor for use with one KX-NT136 IP Telephone (NT265)
Required if power is not supplied over the network (POE)
 
KX-A237
 
 
 
   
     
 
KX-A239
   AC Adaptor for the KX-NT300 Series Telephones  

Includes one adaptor for use with KX-NT300 Series telephone
 
KX-A239
    
 
   
 
KX-TDE MPR CARD
(For upgrading a TDA to TDE)
    
 
     
     
 
KX-TDE0101
   KX-TDE MPR Card  
1 MB of Flash
128 MB of  SDRAM
LAN: 2 Ethernet 100BASE-T
Built-in SVM Circuit

Required to upgrade a KX-TDA100 or KX-TDA200 To a KX-TDE100 or KX-TDE200
 
KX-TDE0101
 
 
 
 
 
 
 
 
 
  HB DISTRIBUTORS 2005-9©
All Trademarks Belong to Their Respective Companies.
All Prices and Manufacturer's Specifications are Subject to Change Without Notice, Daily.
All rights reserved. HB DISTRIBUTORS can not be responsible for misinformation, typographical errrors.
Art work not to scale.