HB Logo  
Panasonic Communication System
KX-TDA Digital Hybrid IP-IPX Systems
    
               
       
Panasonic Logo
     
               
Bottom of Page
KX-TDA HYBRID IP PBX BASIC SYSTEM
                     
       
KX-TDA100
  
Basic Shelf
Maximum Capacity 96 Ports
Contains
* 1 Cabinet with 6 free slots
* 1 Main Processor. (Unit Power Supply Not Included Add the KX-TDA0104
    or KX-TDA0108 Power supply)
* 1 SD Card
Features
* Multi-Cell Wireless  (Add the KX-TDA0142 or the KX-T0141 card) Cell Site
   The KX-TDA0142 Requires a KX-TA0144 (8 Port) Card or KX-TA0143 (4 Port)
   Card
* PC-Based Programming. (Add the KX-TDA0196 card)
* Automatic Route Selection (ARS)
* Toll Restriction
* DXDP (Digital eXtra Device Port)
* 2-MOH Port (See Clarity or On Hold Plus)
* 2-Paging Port (See Clarity or Viking)
* Caller ID (Name & Number) (Add the KX-TDA0193 card)
* ISDN Primary Rate Interface (PRI) with QSIG (Add theKX-TDA0290)
* VoIP Gateway with QSIG (Enhanced System Networking)
    (Add the KX-TDA0484 card)
* VoIP Extensions (Add the KX-TDA0470 card,  KX-NT136 Phone or the IP
    Soft - Phone KX-TDA0350 Soft-Phone )
* T1 ( Add the KX-TDA0187 card)
* Voice Mail Integration VoIP Extensions (Add the KX-TDA0470 card,
    KX-NT136 Phone or the IP Soft - Phone KX-TDA0350 Softphone )
* Uniform Call Distribution (USD) * SMDR ( See PanaLog Software)
* Direct Inward System Access (DISA) - (Add the KX-TDA0191 Card)

                 KX-TDA Digital Hybrid IP-PBX System Feature List #A #B #C  #D #2 #3
  
       
   
  Cash Back Logo      
 
 
     
 
Helpful Links
 
     
PAN DA100
Weight: 21 lbs      
 
MOUNTING HARDWARE & EQUIPMENT
      KX-TDA100 "Easy" Installation Kit

Call for Configuration		  
 
"Easy" Installation Kit
   
       
       
PRICE: P.O.R.
    
 
 
               
   
KX-A243
   19" Bracket For The KX-TDA100
For mounting the KX-TDA100 cabinet in a 19" rack
Equipment Rack (ITN 1907) 19" X 72" Racks		  
   
KX-A243
    
 
PAN A243
      Weight: 5 lbs        
   
 
   
19" Rack
ITN 1907
           
Equipment Rack
     ITN 1907       19" X 72"
     For mounting system components 		 
ITN 1907
Weight : 40  lbs.            
 
 
   
Leviton
LEV 5500-190
   19" Rack Mountable Surge Protection
* With ON/OFF Switch, NEMA 5-15P St. Blade Plug
* Clamping profile tightly tracks AC sine wave
* 6 Protected duplex receptacles 5 in back , 1 in front
* Resettable circuit breaker protects against overloading
   & power supply failure
* 12' Power cord		  
   
   
               
Weight :   lbs.        
PRICE: P.O.R.
     
 
 
Minute Man
MIN E1500
Tower or Rack Mountable Battery Back Up
 
MIN E1500
Weight : 82 lbs.         
 
 
Tripp-Lite
TLP 1B20
Signal ground Surge Protection  
      2 outlets; direct plug-in
     Surge energy absorption: 600 joules; 48,000 amps
      Diagnostic LED indicates protection present
      MI/RFI noise filter
   
   
 
 
TLP 1B20
Weight : 2 lbs.           
 
 
Minute Man
MIN PRO1500E
Battery Back Up  
     Pro E Series is designed for the protection of PCs, TELEPHONE SYSTEMS and data
     communications. Built in double boost and single buck AVR (automatic voltage regulator)
     function compensates for broader range of low AC voltage situations like brownout and
     sags as well as high AC voltage situation like surges and spikes saving internal battery
     power for blackout. Independent Battery Bypass™ allows the UPS to provide voltage
     regulation with surge and spike protection on utility AC power even when the batteries
     are weak or dead. Includes MINUTEMAN Sentry ll ™ power management and
     diagnostic software. Integrated USB and RS232 ports for software communication.		  
MIN PRO1500E
Weight: 50 lbs        
   
 
 
Powervar
Power Conditioners
  Power-conditioned UPS
 When combined with a POWERVAR power conditioner,
POWERVAR's ACE line of power-conditioned UPSes are
field-proven to increase equipment reliability and uptime by as
much as 70%—and to provide critical backup power in the
event of those all too common power glitches		  
 
MUSIC & COMMERCIAL ON HOLD
Clarity by Valcom
CLA SFMT
Music on hold
     CLA  SFMT
     Wall Mountable FM Radio with Antenna and Power Supply.
 
CLASFMT
Weight : 2  lbs.           
   
 
   
On Hold Plus
OHP 5000
   Commercial on Hold
* Built in CD player
* Down loadable
* Input Jack
* 1-FREE Personalized Message (a $99.00 value) 		 
OHP 5000
Weight : 5 lbs.     
 
Discontinued
On Hold Plus
OHP 6000
 Commercial on Hold
* MP3 on Hold
* MP3 only
* 1-FREE Personalized Message (a $99.00 value)
 
OHP 6000
Weight : 4 lbs.  
 
               
   
On Hold Plus
OHP 7000
   Commercial on Hold
* Digital Flash Memory
* Integrated CD Mechanism
* CD Autoload
* USB Connection
* Auto-start after Power Loss
* Wall-Mountable
* Free Personalization		  
   
   
OHP 7000
Weight : 6 lbs.
Click image to enlarge
  
 
KX-TDA100 SYSTEM POWER SUPPLY  (One M or S required Per System.)
KX-TDA0104
 M-Type Power Supply
Medium plug in system power supply for use in the KX-TDA100 Basic shelf
To determine the correct size power supply for your application,
please refer to the Power Supply Sizing Chart #1, #2, #6
PAN DA0104
Weight: 9 lbs        
 
 
 
KX-TDA0108
 S-Type Power Supply
Small plug in system power supply for use in the KX-TDA100 Basic shelf
To determine the correct size power supply for your application,
please refer to the Power Supply Sizing Chart #1, #2, #6		  
PAN DA0108
Weight: 8 lbs        
 
 
   
KX-A237
   AC Adaptor for the KX-NT136 & KX-NT265
Includes one adaptor for use with one KX-NT136 IP Telephone
Required if power is not supplied over the network (POE)		  
   
PAN A237
Weight : 2 lbs.        
 
KX-TDA100 CELL STATION CARDS
       
KX-TDA0144
 8-Port Cell Station Interface card (CSIF8)
Required for multi-cell operation 3-Channel Cell Station
3 Channel Cell Station. Supports up to 8 Cell Stations (KX-TDA0142)
1 card requires 1 free slot
"Easy" Installation kit available
Please refer to System Capacities Chart #3		  
 
   
PAN DA0144
Weight: 2 lbs     
 
 
 
KX-TDA0143
 4-Port Cell Station interface card (CSIF4)
Required for multi-cell operation
3 Channel Cell station. Supports up to 4 Cell Stations (KX-TDA0142)
One card requires one free slot
"Easy" Installation kit available
Please refer to System Capacities Chart #3 		 
 
PAN DA0143
Weight: 3 lbs             
 
 
Cell Station
 
Cell Station "Easy" Installation Kit
 
"Easy" Installation Kit
ITN 66M150G 66 M Block with 1 M Amp
ITN 66M150I 66 M Block with 2 M Amps
ITN NEC25GF4 6 leg Octopus 4' 8C to F Amp
Quantity will very depending on quantity of KX-TDA0144 & KX-TDA0143 cards
 
   
 
 
 
 
 
 
 
HB DISTRIBUTORS 2005/6 ©
All Trademarks Belong to Their Respective Companies. All Prices and Manufacturer's Specifications are Subject to Change Without Notice, Daily.
All rights reserved. HB Distributors can not be responsible for misinformation, typographical errrors. Art work not to scale.