Panasonic
Communication System
KX-TDA Digital Hybrid IP-IPX Systems
KX-TDA Digital Hybrid IP-IPX Systems
 |
||
| KX-TDA
HYBRID IP PBX SYSTEM |
||||||||||||||||||||||||
KX-TDA200 |
Basic
Shelf Maximum Capacity 192 Ports Contains * 1 Cabinet with 11 free slots * 1 Main Processor. (Unit Power Supply Not Included Add KX-TDA0103 or KX-TDA0104 Power Supply) * 1 SD card Features * Multi-Cell Wireless (Add the KX-TDA0142 or the KX-T0141 cell station) The KX-TDA0142 Requires a KX-TDA0144 (8 port) Card or KX-TDA0143 (4 port) Card * PC-Based Programming. * Remote programming ( Add the KX-TDA0196 card) * Automatic Route Selection (ARS) * Toll Restriction * 2-MOH Port (See Clarity or On Hold Plus) * 2-Paging Port (See Clarity or Viking) * Caller ID (Name & Number) (Add the KX-TDA0193 card) * ISDN Primary Rate Interface (PRI) with QSIG (Add the KX-TDA0290 card) * VoIP Gateway with QSIG Enhanced System Networking (Add the KX-TDA0484 card) * VoIP Extensions (Add the KX-TDA0470 card, KX-NT136 Phone or the IP Soft - Phone KX-TDA0350 Soft-Phone Software) * DXDP (Digital eXtra Device Port) * T1 (Add the KX-TDA0187 card) * Voice Mail Integration * Uniform Call Distribution (USD) * SMDR (See PanaLog Software) * Direct Inward System Access (DISA) - (Add the KX-TDA0191) KX-TDA Digital Hybrid IP-PBX System Features List #A, #B, #C, #D, #2, #3 |
|||||||||||||||||||||||
 |
||||||||||||||||||||||||
 |
||||||||||||||||||||||||
 |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
PAN DA200 |
||||||||||||||||||||||||
| Weight: 29 lbs |  |
|||||||||||||||||||||||
| MOUNTING
HARDWARE & EQUIPMENT |
||||||
"Easy"
Installation Kit |
KX-TDA200
"Easy" Installation Kit Call for configuration |
|||||
PRICE: P.O.R. |
||||||
KX-A242 |
19"
Bracket For The KX-TDA200 For mounting the KX-TDA200 cabinet in a 19" rack. Equipment Rack (ITN 1907) 19" X 72" Racks |
||||||
 |
|||||||
PAN A242 |
|||||||
| Weight: 5 lbs | |
||||||
19"
Rack ITN 1907 |
|||||||
| Equipment
Rack ITN 1907 19" X 72" For mounting system components |
|||||||
 |
|||||||
PAN 1907 |
|||||||
| Weight: 40 lbs | |
||||||
Leviton LEV 5500-190 |
LEV
5500-190 Rack Mountable Surge Protection With On/OFF Switch, NEMA 5-15P St. Blade Plug |
||||||
| Weight: 1 lbs | PRICE: P.O.R. |
||||||
Minute
Man MIN E1500 |
Rack Mountable Battery Back Up | ||||||
 |
|||||||
MIN E1500 |
|||||||
| Weight: 82 lbs | |
||||||
Powervar Power Conditioners |
|||||||
| Power-conditioned
UPS When combined with a POWERVAR power conditioner, POWERVAR's ACE line of power-conditioned UPSes are field-proven to increase equipment reliability and uptime by as much as 70% and to provide critical backup power in the event of those all too common power glitches. |
|||||||
 |
|||||||
| Weight: lbs | PRICE: P.O.R. |
||||||
| MUSIC
& COMMERCIAL ON HOLD |
|||||||
Clarity
by Valcom CLA SFMT |
Music
on hold CLA SFMT Wall Mountable FM Radio with Antenna and Power Supply. |
||||||
 |
|||||||
CLA SFMT |
|||||||
| Weight: 2 lbs | |
||||||
On
Hold Plus OHP 5000 |
Commercial
on Hold * Built in CD player * Down loadable * Input Jack * 1-FREE Personalized Message (a $99.00 value) |
||||||
 |
|||||||
OHP 5000 |
|||||||
| Weight: 6 lbs | |||||||
Discontinued |
|||||||
On
Hold Plus OHP 6000 |
Commercial
on Hold * MP3 on Hold * MP3 only * 1-FREE Personalized Message (a $99.00 value) |
|||||
 |
||||||
OHP 6000 |
||||||
| Weight: 4 lbs | |
|||||
| KX-TDA200
SYSTEM POWER SUPPLY (one L or M Required Per System) |
|||||||
KX-TDA0103 |
L-Type
Power Supply |
||||||
|
|||||||
PAN
DA0103 |
|||||||
| Weight: 10 lbs | |
||||||
KX-TDA0104 |
M-Type
Power Supply Medium plug in system power supply for use in the KX-TDA200 Basic shelf To determine the correct size power supply for your application, Please refer to the Power Supply Sizing Chart #1 #2 #6 |
||||||
|
|||||||
PAN DA0104 |
|||||||
| Weight: 9 lbs | |
||||||
KX-A237 |
AC
Power Adapter For use with KX-NT136 telephones when power switch or patch panel is not used |
||||||
PAN A237 |
|||||||
| Weight : 2 lbs. | |
||||||
| KX-TDA200
CELL STATION CARDS |
|||||||
KX-TDA0144 |
8-Port
Cell Station Interface card (CSIF8) Required for multi-cell operation 3- Channel Cell station Supports up to 8 Cell Stations (KX-TDA0142) 1 card requires 1 free slot " Easy" Installation Kit Available Please refer to System Capacities Chart #3 |
||||||
|
|||||||
PAN DA0144 |
|||||||
| Weight: 2 lbs | |
||||||
KX-TDA0143 |
4-Port
Cell Station interface card (CSIF4) Required for multi-cell operation 3- Channel Cell station Supports up to 4Cell Stations (KX-TDA0142) 1 card requires 1 free slot " Easy" Installation Kit Available Please refer to System Capacities Chart #3 |
||||||
|
|||||||
PAN DA0143 |
|||||||
| Weight: 2 lbs | |
||||||
Cell
Station |
Cell Station "Easy" Installation Kit | |||||||
"Easy"
Installation Kit |
||||||||
| ITN 66M150G | 66
M Block with 1 M Amp |
|
||||||
| ITN 66M150I | 66
M Block with 2 M Amps |
|
||||||
| ITN NEC256F4 | 6 Leg
Octopus 4' 8C to F Amp |
|
||||||
| Quantity will very depending on quantity of KX-TDA0144 & KX-TDA0143 cards | ||||||||