Untitled Document


			Panasonic Communication System KX-TDA Digital Hybrid IP-IPX Systems

	KX-TDA HYBRID IP PBX SYSTEM


	KX-TDA200			Basic Shelf Maximum Capacity 192 Ports Contains * 1 Cabinet with 10 free slots * 1 Main Processor. (Unit Power Supply Not Included Add KX-TDA0103 or KX-TDA0104 Power Supply) * 1 SD card

				Features * Multi-Cell Wireless (Add the KX-TDA0142 or the KX-T0141 cell station) The KX-TDA0142 Requires a KX-TDA0144 (8 port) Card or KX-TDA0143 (4 port) Card * PC-Based Programming. * Remote programming ( Add the KX-TDA0196 card) * Automatic Route Selection (ARS) * Toll Restriction * 2-MOH Port (See Clarity or On Hold Plus) * 2-Paging Port (See Clarity or Viking) * Caller ID (Name & Number) (Add the KX-TDA0193 card) * ISDN Primary Rate Interface (PRI) with QSIG (Add the KX-TDA0290 card) * VoIP Gateway with QSIG Enhanced System Networking (Add the KX-TDA0484 card) * VoIP Extensions (Add the KX-TDA0470 card, KX-NT136 Phone or the IP Soft - Phone KX-TDA0350 Soft-Phone Software) * DXDP (Digital eXtra Device Port) * T1 (Add the KX-TDA0187 card) * Voice Mail Integration * Uniform Call Distribution (USD) * SMDR (See PanaLog Software) * Direct Inward System Access (DISA) - (Add the KX-TDA0191) KX-TDA Digital Hybrid IP-PBX System Features List #A, #B, #C, #D, #2, #3
	Helpful Links





	PAN DA200

MOUNTING HARDWARE & EQUIPMENT


	"Easy" Installation Kit		KX-TDA200 "Easy" Installation Kit Call for configuration	PRICE: P.O.R.



	KX-A242		19" Bracket For The KX-TDA200 For mounting the KX-TDA200 cabinet in a 19" rack. Equipment Rack (ITN 1907) 19" X 72" Racks

				PAN A242

	19" Rack ITN 1907		Equipment Rack
			ITN 1907 19" X 72" For mounting system component
				PAN 1907

	Minute man		Rack Mountable Battery Back Up
	MIN E1500

				MIN E1500

	Tripp-Lite		Signal ground Surge Protection
			2 outlets; direct plug-in Surge energy absorption: 600 joules; 48,000 amps Diagnostic LED indicates protection present MI/RFI noise filter

				TLP 1B20

	Minute man		Battery Back Up
	MIN E1500		Pro E Series is designed for the protection of PCs, TELEPHONE SYSTEMS and data communications. Built in double boost and single buck AVR (automatic voltage regulator) function compensates for broader range of low AC voltage situations like brownout and sags as well as high AC voltage situation like surges and spikes saving internal battery power for blackout. Independent Battery Bypass™ allows the UPS to provide voltage regulation with surge and spike protection on utility AC power even when the batteries are weak or dead. Includes MINUTEMAN Sentry ll ™ power management and diagnostic software. Integrated USB and RS232 ports for software communication.

				MIN PRO1500E

	Powervar		Power-conditioned UPS
	Power Conditioners
			When combined with a POWERVAR power conditioner, POWERVAR's ACE line of power-conditioned UPSes are field-proven to increase equipment reliability and uptime by as much as 70% and to provide critical backup power in the event of those all too common power glitches.

				PRICE: P.O.R

MUSIC & COMMERCIAL ON HOLD


	Clarity by Valcom		Music on hold
	CLA SFMT		CLA SFMT Wall Mountable FM Radio with Antenna and Power Supply.

				CLA SFMT

	On Hold Plus		Commercial on Hold
	OHP 5000		* Built in CD player * Down loadable * Input Jack * 1-FREE Personalized Message (a $99.00 value)


				OHP 5000
			Discontinued	See the OHP 7000

	On Hold Plus		Commercial on Hold
	OHP 6000		* MP3 on Hold * MP3 only * 1-FREE Personalized Message (a $99.00 value)


				OHP 6000

	On Hold Plus		Commercial on Hold
	OHP 7000		* Digital Flash Memory * Integrated CD Mechanism * CD Autoload * USB Connection * Auto-start after Power Loss * Wall-Mountable * Free Personalization

				OHP 7000

KX-TDA200 SYSTEM POWER SUPPLY (one L or M Required Per System)


	KX-TDA0103		L-Type Power Supply
			Large plug in system power supply for use in the KX-TDA200 Basic shelf To determine the correct size power supply for your application, Please refer to the Power Supply Sizing Chart #1 #2 #6
				PAN DA0103

	KX-TDA0104		M-Type Power Supply
			Medium plug in system power supply for use in the KX-TDA200 Basic shelf To determine the correct size power supply for your application, Please refer to the Power Supply Sizing Chart #1 #2 #6
				PAN DA0104

KX-TDA200 CELL STATION CARDS


	KX-TDA0144		8-Port Cell Station Interface card (CSIF8)
			Required for multi-cell operation 3- Channel Cell station Supports up to 8 Cell Stations (KX-TDA0142) 1 card requires 1 free slot " Easy" Installation Kit Available Please refer to System Capacities Chart #3
				PAN DA0144

	KX-TDA0143		4-Port Cell Station interface card (CSIF4)
			Required for multi-cell operation 3- Channel Cell station Supports up to 4Cell Stations (KX-TDA0142) 1 card requires 1 free slot " Easy" Installation Kit Available Please refer to System Capacities Chart #3
				PAN DA0143

	Cell Station		Cell Station "Easy" Installation Kit
	"Easy" Installation Kit
			ITN 66M150G	66 M Block with 1 M Amp

			ITN 66M150I	66 M Block with 2 M Amps
			ITN NEC256F4	6 Leg Octopus 4' 8C to F Amp
			Quantity will very depending on quantity of KX-TDA0144 & KX-TDA0143 cards





BACK	HOME	CLOSE OUTS	TOP OF PAGE	NEXT

HB DISTRIBUTORS 2005/9 © All Trademarks Belong to Their Respective Companies. All Prices and Manufacturer's Specifications are Subject to Change Without Notice, Daily. All rights reserved. HB DISTRIBUTORS can not be responsible for misinformation, typographical errrors. Art work not to scale.